Vertical Galva
Technical details
Specification text
Without sacrificing any heat output the vertical design of the Vertical Galva saves space. In addition, this radiator is treated with a protective galvanized coating, so it can be used without any concerns in wet areas.
Product
vertical panel radiator with a centre connection and a protective galvanised coating
Finishing
protective galvanised coating and side panels (only for types 11, 20, 21 and 22)
Also supplied
wall brackets, ETA safety screws and plugs, screws, plugs, air vent, blind plugs and installation instructions
Connections
4 x ½” female connection (centre connection included). Types 20, 21 and 22 can be reversed (front/back), in which case inlet and outlet are also reversed.
Lugs
no lugs
Packaging
Every radiator is sturdily packaged in high-quality cardboard and wrapped in plastic. The product description is shown on the label: type – height – length.
Warranty
10 years, as long as the installation instructions have been followed and Henrad’s warranty conditions have been met.
Paint process
All radiators are galvanised, degreased, phosphated, cataphoretically primed and powder-coated in Henrad white 9016 as standard.
Colours
Henrad white 9016 + 35 different Henrad colours and about 200 RAL-colours are possible
Heat cost allocator
Suitable for heat cost allocators, both electronic and according to the evaporation principle (covered by the norm of EN834 & EN835).
Max. operating pressure
10 bar (tested to 13 bar)
Max. operating temperature
110 °C
Conformity
in accordance with EN442
Types
10 | 11 | 20 | 21 | 22
Heights
1.600 | 1.800 | 2.000 | 2.200 mm
Lengths
300 | 400 | 500 | 600 | 700 mm
Depths
47 | 47 | 77 | 77 | 100 mm
Heat output & dimensions
Type overview
Type 10 | Type 11 | Type 20 | Type 21 | Type 22 | |
---|---|---|---|---|---|
Height: 1600 mm | |||||
W | 1.677 | 2.157 | 2.592 | 3.030 | 3.630 |
kg | 30,9 | 42,9 | 63,3 | 71,1 | 80,7 |
l | 7,2 | 7,2 | 14,4 | 14,1 | 14,1 |
m² | 3,67 | 9,4 | 7,33 | 12,66 | 28,99 |
n | 1,2748 | 1,3361 | 1,3202 | 1,3235 | 1,3276 |
Height: 1800 mm | |||||
W | 1.863 | 2.379 | 2.865 | 3.330 | 3.960 |
kg | 34,5 | 48,3 | 71,1 | 80,1 | 88,8 |
l | 8,4 | 8,4 | 16,2 | 16,5 | 16,2 |
m² | 4,13 | 9,86 | 8,25 | 13,58 | 29,9 |
n | 1,2892 | 1,3320 | 1,3135 | 1,3263 | 1,3310 |
Height: 2000 mm | |||||
W | 2.058 | 2.595 | 3.120 | 3.600 | 4.290 |
kg | 38,1 | 53,7 | 78,6 | 89,1 | 96,6 |
l | 9,3 | 9,3 | 18 | 18,6 | 18 |
m² | 4,59 | 12,15 | 9,17 | 16,2 | 37,74 |
n | 1,3037 | 1,3278 | 1,3068 | 1,3292 | 1,3344 |
Height: 2200 mm | |||||
W | 2.265 | 2.802 | 3.390 | 3.870 | 4.620 |
kg | 42 | 57,9 | 87,6 | 98,4 | 108,9 |
l | 10,2 | 10,2 | 20,1 | 20,1 | 20,1 |
m² | 5,04 | 12,61 | 10,09 | 17,11 | 38,66 |
n | 1,3182 | 1,3237 | 1,3000 | 1,3320 | 1,3379 |
Calculation Factor per meter length radiator at 75/65/20 °C in accordance with EN442
Characteristic equation: ф = KM x ΔTn
Connections
Types 10 | 11 | 20 | 21 | 22
Types 20 | 21 | 22
(*) With a top connection, the radiator must be vented on both the supply and return sides. Top connection allowed provided there is a temperature difference between flow and return of maximum 20°C.
Installation
Type 10
Type 11
Type 20-21
Type 22
Type 10
Type 11-22
Drill holes for the brackets
H (mm) | T10 | T11 | T20-22 | ||||||
H2 | H3 | H4 | H2 | H3 | H4 | H2 | H3 | H4 | |
1600 | 170 | 270 | 1500 | 160 | 730 | 1300 | 70 | 740 | 1410 |
1800 | 170 | 270 | 1700 | 160 | 830 | 1500 | 70 | 840 | 1610 |
2000 | 170 | 270 | 1900 | 160 | 930 | 1700 | 70 | 940 | 1810 |
2200 | 170 | 270 | 2100 | 160 | 1030 | 1900 | 70 | 1040 | 2010 |
Distance between the centre of the radiator and the bracket
L (mm) | T10 | T11 | T20-22 | |
A | B | B | B | |
300 | 45 | 75 | 50 | 60 |
400 | 95 | 125 | 80 | 110 |
500 | 145 | 175 | 130 | 160 |
600 | 195 | 225 | 180 | 210 |
700 | 245 | 275 | 230 | 260 |