Reno Plan

Reno Plan

Reno Plan


Radiator for renovation purposes

Radiator for renovation purposes

Technical details

Specification text

The Reno Plan is a compact radiator, with a beautiful decorative flat front, specially designed for use in home renovations. Its very specific dimensions make it possible to replace the old cast iron and column radiators while preserving the existing pipes. Simple and quick installation is possible without conversion. In addition, this radiator offers the same advantages as a compact radiator thanks to its finish with a sturdy housing and decorative grille.

Product
the fully encased compact radiator with a flat front specifically developed for the renovation market
Finishing
decorative flat front, upper grille and side panels
Also supplied
installation instructions
Connections
4 x ½” female connection
Lugs
2 pairs of mounting lugs up to 1.600 mm and 3 pairs from 1.800 mm
Packaging
Every radiator is sturdily packaged in high-quality cardboard and wrapped in plastic. The radiator’s characteristics are shown on the label: type – height – length.
Warranty
10 years, as long as the installation instructions have been followed and Henrad’s warranty conditions have been met.
Paint process
All radiators are degreased, phosphated, cataphoretically primed and powder-coated in Henrad white 9016 as standard.
Colours
Henrad white 9016 + 35 different Henrad colours and about 200 RAL-colours are possible
Max. operating pressure
10 bar (tested at 13 bar)
Max. operating temperature
110 °C
Conformity
in accordance with EN442
Types
21 | 22 | 33
Heights
550 | 950 mm
Lengths
400 – 2.000 mm
Depths
79 | 102 | 160 mm

Heat output & dimensions

Type overview

  Type 21 Type 22 Type 33
Height: 550 mm
Centre distance: 500 mm
W 1.146 1.524 2.176
kg 31,89 36,60 53,33
l 5,95 5,95 9,00
m² 4,78 7,04 10,55
n 1,3218 1,3165 1,3376
Height: 950 mm
Centre distance: 900 mm
W 1.815 2.309 3.300
kg 50,85 56,45 81,25
l 10,45 10,50 15,63
m² 8,52 12,68 19,02
n 1,3115 1,3472 1,3771

 

Calculation Factor per meter length radiator at 75/65/20 °C in accordance with EN442
Characteristic equation: ф = KM x ΔTn

Connections

compact-1
compact-3
compact-5
compact-7
compact-9
compact-2
compact-4
compact-6
compact-8
compact-10

* = a reduction in heat output will occur when combining low temperature heating with a high temperature difference between inlet and outlet.

Lugs

Length 400-1600

SHORT-STRIPPEN.png
L A
400-1600 133

Length 1800-2000

LONG-STRIPPEN
L A
1800-2000 133

Mounting and connection dimensions

Mounting dimensions

Type 21

T21-RENO-FF

Type 22

T22-RENO-FF

Type 33

T33-RENO-FF

Connection dimensions

std-aansluitmaten

L = Length of the radiator