the fully encased valve radiator with a height of 200 mm

upper grille and side panels

preset Heimeier 4368 or 4369 valve insert

The integrated adjustable valve insert (without thermostatic head) is factory-fit on the right side of the radiator, CEN certified, tested in accordance with EN215 and compatible with thermostatic heads M30 x 1,5 mm.
The thermostatic valve insert is factory-set in relation to the size of the radiator. This presetting ensures optimum throughput in the radiator. Factory setting for two-pipe systems, also suitable for one-pipe systems (as long as the valve insert is adjusted to position 8).

air vent and blind plugs

6 x ½” female connection (2 x ½” lateral bottom connection included).

no lugs

Every radiator is sturdily packaged in high-quality cardboard and wrapped in plastic. The radiator’s characteristics are shown on the label: type – height – length.

10 years, as long as the installation instructions have been followed and Henrad’s warranty conditions have been met.

All radiators are degreased, phosphated, primed and powder-coated in Henrad white 9016 as standard.

Henrad white 9016 + 35 different Henrad colours and about 200 RAL-colours are possible

Suitable for heat cost allocators, both electronic and according to the evaporation principle (covered by the norm of EN834 & EN835).

10 bar (tested to 13 bar)

110 °C

in accordance with EN442

22 | 33 | 44

200 mm

1.000 – 2.600 mm

100 | 158 | 216 mm