the low-temperature valve radiator specifically developed for environments where hygiene and safety are all-important, with serial flow technology, both a centre and lateral bottom connection and a preset valve insert, which can be fitted and the left or right side of the radiator

without upper grille or side panels and without convection fins

preset Heimeier 4368 or 4369 valve insert, ECO air vent and blind plugs

The integrated adjustable valve insert (without thermostatic head) is factory-fit on the right side of the radiator, CEN certified, tested in accordance with EN215 and compatible with thermostatic heads M30 x 1,5 mm. For types 20 and 30 the valve insert can also be fitted on the left side of the radiator, a left version for a type 10 radiator is available on request.
The thermostatic valve insert is factory-set in relation to the size of the radiator. This presetting ensures optimum throughput in the radiator. Factory setting for two-pipe systems, also suitable for one-pipe systems (as long as the valve insert is adjusted to position 8).

VDI brackets with anti-lift (type Monclac), screws, plugs, air vent, blind plug and installation instructions

2 x ¾” male Eurocone centre connection and 2 x ½” female lateral bottom connection. Left version (type 20-30) only with 2 x ½” female lateral bottom connection.

2 pairs of mounting lugs up to 1.600 mm and 3 pairs from 1.800 mm

Every radiator is sturdily packaged in high-quality cardboard and wrapped in plastic. The radiator’s characteristics are shown on the label: type – height – length.

10 years, as long as the installation instructions have been followed and Henrad’s warranty conditions have been met.

All radiators are degreased, phosphated, cataphoretically primed and powder-coated in Henrad white 9016 as standard.

Henrad white 9016 + 35 different Henrad colours and about 200 RAL-colours are possible

Suitable for heat cost allocators, both electronic and according to the evaporation principle (covered by the norm of EN834 & EN835).

10 bar (tested to 13 bar)

110 °C

in accordance with EN442

Hygiene

10 | 20 | 30

300 | 400 | 500 | 600 | 700 | 900 mm

400 – 3.000 mm

47 | 77 | 158 mm