ECO Galva

Eco radiator suited for wet areas

Technical details

Specification text

The ECO radiator and its serial flow technology are perfectly suited to operate in low-temperature heating systems. This technology (water flows first through the front panel) results in higher energy efficiency, maximum radiation, faster heating rate and less waste of energy through the back wall. In addition, the ECO Galva radiator is treated with a protective galvanized coating, so it can be used without any concerns in wet areas.

Product

low-temperature valve radiator with serial flow technology, perfectly suited for low-temperature heating systems, specifically developed for environments where hygiene and safety are all-important and equipped with a protective galvanised coating underneath, both a centre and lateral bottom connection and a preset valve insert, which can be fitted on the left or right side of the radiator

Finishing

protective galvanised coating without top grille or side panels

Pre-installed

preset Heimeier 4368 or 4369 valve insert, ECO air vent and blind plugs

Valve insert

The integrated adjustable valve insert (without thermostatic head) is factory-fit on the right side of the radiator, CEN certified, tested in accordance with EN215 and compatible with thermostatic heads M30 x 1,5 mm. For types 21, 22 and 33 the valve insert can also be fitted on the left side of the radiator.
The thermostatic valve insert is factory-set in relation to the size of the radiator. This presetting ensures optimum throughput in the radiator. Factory setting for two-pipe systems, also suitable for one-pipe systems (as long as the valve insert is adjusted to position 8).

Also supplied

VDI brackets with anti-lift (type Monclac), screws, plugs, air vent, blind plug and installation instructions

Connections

2 x ¾” male Eurocone centre connection and 2 x ½” female lateral bottom connection

Lugs

2 pairs of mounting lugs up to 1.600 mm and 3 pairs from 1.800 mm

Packaging

Every radiator is sturdily packaged in high-quality cardboard and wrapped in plastic. The product description is shown on the label: type – height – length.

Warranty

10 years, as long as the installation instructions have been followed and Henrad’s warranty conditions have been met.

Paint process

All radiators are galvanised, degreased, phosphated, cataphoretically primed and powder-coated in Henrad white 9016 as standard.

Colours

Henrad white 9016 + 35 different Henrad colours and about 200 RAL-colours are possible

Heat cost allocator

Suitable for heat cost allocators, both electronic and according to the evaporation principle (covered by the norm of EN834 & EN835).

Max. operating pressure

10 bar (tested to 13 bar)

Max. operating temperature

110 °C

Conformity

in accordance with EN442

Types

11 | 21 | 22 | 33

Heights

300 | 400 | 500 | 600 | 700 | 900 mm

Lengths

400 – 3.000 mm

Depths

60 | 77 | 100 | 158 mm

ECO Galva - Specification text

word - 15.99 KB

Download

Heat output & dimensions

ECO Galva - Heat output calculator

excel - 28.37 KB

Download

Type overview

	Type 11	Type 21	Type 22	Type 33
Height: 300mm
W	517	770	958	1.349
kg	8,38	13,85	15,50	22,90
l	1,89	3,8	3,7	5,2
m²	2,09	2,44	3,51	5,26
n	1,3145	1,2546	1,2753	1,2716
Height: 400mm
W	687	978	1.212	1.726
kg	11,68	18,28	20,55	30,53
l	2,34	4,8	4,77	6,8
m²	2,95	3,37	4,92	7,38
n	1,3057	1,2729	1,2867	1,2838
Height: 500mm
W	848	1.174	1.452	2.071
kg	14,99	22,72	25,60	38,17
l	2,8	5,8	5,83	8,4
m²	3,8	4,31	6,33	9,49
n	1,2968	1,2912	1,2982	1,2959
Height: 600mm
W	1.000	1.360	1.679	2.387
kg	18,30	27,15	30,65	45,80
l	3,25	6,8	6,9	10
m²	4,66	5,24	7,74	11,61
n	1,2880	1,3095	1,3096	1,3081
Height: 700mm
W	1.142	1.538	1.896	2.674
kg	22,9	32,7	38,07	57
l	3,77	7,57	7,63	11,25
m²	5,51	6,18	9,15	13,72
n	1,2889	1,3152	1,3129	1,3207
Height: 900mm
W	1.397	1.872	2.303	3.171
kg	27,40	39,65	45,60	67,94
l	4,8	9,1	9,1	13,75
m²	7,22	8,05	11,97	17,96
n	1,2907	1,2751	1,2898	1,2327

Calculation Factor per meter length radiator at 75/65/20 °C in accordance with EN442
Characteristic equation: ф = K_M x ΔTⁿ

Connections

Type 11

Type 21 -33

Important notice for ECO radiators: The green ECO air vent is essential for the proper working of the radiator and cannot be replaced by a traditional air vent as the radiator will keep on heating.