Alto Tango
Alto Tango
Technical details
Specification text
The plain, sleek design means this radiator matches any interior in any living style. The front curves round nicely into the side panels in one flowing seamless form. A range of colours allows you to go that one step further in fully adapting the Alto Tango to match your interior requirements.
Product
the decorative vertical radiator with a centre connection, a minimum distance to the wall and a neat angular look
Finishing
completely smooth, angled design
Also supplied
wall brackets, ETA safety screws and plugs, screws, plugs, air vent, blind plugs and installation instructions
Connections
4 x ½” female connection (centre connection included)
Lugs
no lugs
Packaging
Every radiator is sturdily packaged with protective foam-filled bags, in high-quality cardboard and wrapped in plastic. The radiator’s characteristics are shown on the label: type – height – length.
Warranty
10 years, as long as the installation instructions have been followed and Henrad’s warranty conditions have been met.
Paint process
All radiators are degreased, phosphated, cataphoretically primed and powder-coated in Henrad white 9016 as standard.
Colours
Henrad white 9016 + 35 different Henrad colours and about 200 RAL-colours are possible
Max. operating pressure
10 bar (tested to 13 bar)
Max. operating temperature
110 °C
Conformity
in accordance with EN442
Types
21 | 22
Heights
1.820 | 2.020 mm
Lengths
410 | 510 | 610 mm
Depths
96 | 119 mm
Heat output & dimensions
Type overview
|
|
Type 21 |
Type 22 |
||
|---|---|---|---|---|
| Height: 1820mm | ||||
| W | 3.060 | 3.690 | ||
| kg | 96 | 105,3 | ||
| l | 15,9 | 15,9 | ||
| m² | 13,58 | 29,9 | ||
| n | 1,3041 | 1,3250 | ||
| Height: 2020mm | ||||
| W | 3.270 | 3.960 | ||
| kg | 106,2 | 116,4 | ||
| l | 17,7 | 17,7 | ||
| m² | 16,2 | 37,74 | ||
| n | 1,3006 | 1,3277 | ||
Calculation Factor per meter length radiator at 75/65/20 °C in accordance with EN442
Characteristic equation: ф = KM x ΔTn
Connections
Installation
Type 21
Type 22
Type 21 - 22
Drill holes for the brackets
| H (mm) | T21-22 | ||
| H2 | H3 | H4 | |
| 1820 | 70 | 840 | 1610 |
| 2020 | 70 | 940 | 1810 |
Distance between the centre of the radiator and the bracket
| L (mm) | T21-22 |
| B | |
| 410 | 110 |
| 510 | 160 |
| 610 | 210 |
Centre distance
| L | LH |
| Centre distance | |
| 410 | 344 |
| 510 | 444 |
| 610 | 544 |