decorative valve radiator with a flat front

decorative flat front, upper grille and side panels

preset Heimeier 4368 or 4369 valve insert, air vent and blind plugs

The integrated adjustable valve insert (without thermostatic head) is factory-fit on the right side of the radiator, CEN certified, tested in accordance with EN215 and compatible with thermostatic heads M30 x 1,5 mm.
The thermostatic valve insert is factory-set in relation to the size of the radiator. This presetting ensures optimum throughput in the radiator. Factory setting for two-pipe systems, also suitable for one-pipe systems (as long as the valve insert is adjusted to position 8).

VDI brackets with anti-lift (type Monclac), screws, plugs and installation instructions

6 x ½” female connection (2 x ½” lateral bottom connection included). A left version is available on request.

2 pairs of mounting lugs up to 1.600 mm and 3 pairs from 1.800 mm

Every radiator is sturdily packaged in high-quality cardboard and wrapped in plastic. The radiator’s characteristics are shown on the label: type – height – length.

10 years, as long as the installation instructions have been followed and Henrad’s warranty conditions have been met.

All radiators are degreased, phosphated, cataphoretically primed and powder-coated in Henrad white 9016 as standard.

Henrad white 9016 + 35 different Henrad colours and about 200 RAL-colours are possible

10 bar (tested to 13 bar)

110 °C

in accordance with EN442

NF

11 | 21 | 22 | 33

300 | 400 | 500 | 600 | 700 | 900 mm

400 – 3.000 mm

63 | 79 | 102 | 160 mm