Everest Line Plinth

EVEREST-LINE-PLINTH

Everest Line Plinth


Horizontal decorative radiator with flat stylised front

Horizontal decorative radiator with flat stylised front

Technical details

Specification text

Low radiators are highly suitable for spaces with large window sections, like shop windows, verandas, winter gardens and under window sills. The cold air next to a window is converted into pleasant warmth.

With a stylised flat front, a decorative upper grille and side panels the Everest Line Plinth radiator ensure optimal warmth with a minimum of height and a great finish! Moreover this radiator can be connected either as a valve or as a compact radiator.

Product
the decorative valve radiator with a stylish front and a height of 200 mm
Finishing
decorative stylish front, upper grille and side panels
Pre-installed
adjustable Heimeier valve insert type 4368
Valve insert
The integrated adjustable valve insert (without thermostatic head) is factory-fit on the right side of the radiator, CEN certified, tested in accordance with EN215 and compatible with thermostatic heads M30 x 1,5 mm.
Also supplied
air vent and blind plugs
Connections
6 x ½” female connection (2 x ½” lateral bottom connection included).
Lugs
no lugs
Packaging
Every radiator is sturdily packaged in high-quality cardboard and wrapped in plastic. The radiator’s characteristics are shown on the label: type – height – length.
Warranty
10 years, as long as the installation instructions have been followed and Henrad’s warranty conditions have been met.
Paint process
All radiators are degreased, phosphated, primed and powder-coated in Henrad white 9016 as standard.
Colours
Henrad white 9016 + 35 different Henrad colours and about 200 RAL-colours are possible
10 bar (tested to 13 bar)
10 bar (getest op 13 bar)
Max. operating temperature
110 °C
Conformity
in accordance with EN442
Types
22 | 33 | 44
Heights
200 mm
Lengths
1.000 – 2.600 mm
Depths
102 | 160 | 218 mm

Heat output & dimensions

Type overview

  Type 22 Type 33 Type 44
Height: 200mm single sided version
Centre distance: 150mm
W 611 918 1.197
kg 12,3 17,6 23
l 2,8 4,2 5,6
m² 2,05 3,08 4,1
n 1,2614 1,2768 1,2915
Height: 200mm double sided version
Centre distance: 150mm
W 576 906 1.181
kg 13,5 19,3 24,6
l 2,8 4,2 5,6
m² 2,05 3,08 4,1
n 1,2678 1,2579 1,2843

Calculation Factor per meter length radiator at 75/65/20 °C in accordance with EN442
Characteristic equation: ф = KM x ΔTn

Connections

When mounting as a valve radiator:

6-right

When mounting as a compact radiator:

  • the valve insert must be removed.
  • the plastic plugs have to be removed and replaced by brass blinds.
compact-1
compact-3
compact-5
compact-7
compact-9
compact-2
compact-4
compact-6
compact-8
compact-10

* = a reduction in heat output will occur when combining low temperature heating with a high temperature difference between inlet and outlet.

Mounting and connection dimensions

Mounting dimensions

Type 22

t22-plinth-ff

Type 33

t33-plinth-ff

Type 44

t44-plinth-ff

Connection dimensions

vent-t11-33-right-aansluitmaten
L (mm) 1000 1200 1400 1600 1800 2000 2200 2400 2600
E (mm) 447 547 647 747 847 947 1047 1147 1247

L = Length of the radiator